Hi-Yield 2, 4-D Selective Weed Killer Mixing Instructions

Hi-Yield 2, 4-D Selective Weed Killer is a popular product for controlling weeds in lawns and gardens․ It is a systemic herbicide that selectively kills broadleaf weeds․ For spot treatment in non-crop areas, use 1 pint in 3 gallons of water or 4 oz․ in 3/4 gallon in a hand sprayer․ In pastures and range land, use 3 to 4 oz․ in 1 to 3 gallons of water per 1,000 sq․ ft․ For aquatic surface application, mix 4 pints of this product per 100 gallons of water․ Always be sure to consult the product label before mixing and applying Hi-Yield 2, 4-D Selective Weed Killer․

Product Overview

Hi-Yield 2, 4-D Selective Weed Killer is a widely used herbicide designed to control a broad range of broadleaf weeds without harming desirable grasses․ This product is particularly effective in targeting weeds that commonly infest lawns, pastures, and even aquatic environments․ The active ingredient in Hi-Yield 2, 4-D is 2,4-Dichlorophenoxyacetic acid, a systemic herbicide that works by disrupting the growth and development of broadleaf weeds․ The chemical, upon absorption by the weeds, disrupts their natural growth hormones, leading to their eventual demise․

Hi-Yield 2, 4-D Selective Weed Killer is available in various formulations, including liquid concentrates and ready-to-use sprays․ The choice of formulation depends on the specific application and the area to be treated; The product is generally applied as a foliar spray, meaning it is directly applied to the leaves of the weeds․ The herbicide is absorbed through the leaves and translocated throughout the plant, eventually reaching the roots and causing the weed to die․

Hi-Yield 2, 4-D Selective Weed Killer is a powerful and effective herbicide that offers a reliable solution for controlling broadleaf weeds in various settings․ However, it’s crucial to follow the instructions on the product label carefully to ensure safe and effective use․ The product label provides detailed information regarding application rates, mixing instructions, safety precautions, and environmental considerations․

Target Weeds

Hi-Yield 2, 4-D Selective Weed Killer is highly effective in controlling a wide variety of broadleaf weeds, both annual and perennial, commonly found in lawns, pastures, and other areas․ The product is particularly effective against weeds such as dandelion, clover, plantain, chickweed, and many others․

Here is a list of some of the most common broadleaf weeds that Hi-Yield 2, 4-D Selective Weed Killer is known to control⁚

• Annual Broadleaf Weeds⁚ These weeds complete their life cycle within a single growing season, and Hi-Yield 2, 4-D is effective in controlling them․ Examples include crabgrass, spurge, pigweed, and knotweed․
• Perennial Broadleaf Weeds⁚ These weeds live for more than two years, often establishing deep root systems, making them more challenging to control․ Hi-Yield 2, 4-D can effectively target these persistent weeds, including dandelion, clover, plantain, and thistle․

The specific effectiveness of Hi-Yield 2, 4-D Selective Weed Killer against certain weeds may vary depending on factors such as the weed’s growth stage, environmental conditions, and application techniques․

Mixing Instructions

Mixing Hi-Yield 2, 4-D Selective Weed Killer correctly is crucial for achieving effective weed control while minimizing the risk of damage to your lawn or other desired plants․ Always follow the instructions provided on the product label, as mixing ratios may vary depending on the specific formulation and intended application․

Here are some general guidelines for mixing Hi-Yield 2, 4-D Selective Weed Killer⁚

1. Use clean mixing containers⁚ Ensure that the containers you use for mixing are clean and free of any residue from previous chemicals․
2. Add water first⁚ Fill the mixing container partially with water, then add the measured amount of Hi-Yield 2, 4-D Selective Weed Killer․ This helps prevent clumping and ensures proper mixing․
3. Agitate thoroughly⁚ Use a stirring stick or a pump sprayer to agitate the mixture thoroughly, ensuring that the Hi-Yield 2, 4-D Selective Weed Killer is evenly distributed throughout the water․
4. Add remaining water⁚ Once the Hi-Yield 2, 4-D Selective Weed Killer is well-mixed, add the rest of the water to reach the desired volume․ Continue agitating the mixture for a few more minutes to ensure complete blending․
5. Apply immediately⁚ Apply the mixed solution immediately after preparation to avoid any settling or degradation of the active ingredients․

Remember to always wear appropriate protective gear, such as gloves, eye protection, and long pants, when mixing and applying Hi-Yield 2, 4-D Selective Weed Killer․

Spot Treatment

Spot treatment with Hi-Yield 2, 4-D Selective Weed Killer is an effective method for controlling individual weeds or small patches of weeds in non-crop areas like lawns, gardens, and walkways․ This targeted application minimizes the risk of harming desirable plants and reduces the overall amount of herbicide used․

For spot treatment, you’ll need to mix the Hi-Yield 2, 4-D Selective Weed Killer in a smaller volume of water than for broader applications․ Consult the product label for the specific mixing ratio for spot treatment․ Typically, a mixture of 4 ounces of Hi-Yield 2, 4-D Selective Weed Killer per 3/4 gallon of water is recommended․

When applying the solution, use a hand-held sprayer or a small watering can․ Carefully direct the spray to the target weeds, avoiding contact with desirable plants․ Be sure to thoroughly wet the leaves and stems of the weeds for optimal control․

It’s important to note that spot treatment may not be effective for all weed types․ Some weeds, especially those with deep root systems, may require repeated applications for complete control․

Remember to dispose of any unused herbicide solution properly, following the instructions on the product label․

Ornamental Turf

Hi-Yield 2, 4-D Selective Weed Killer is an effective solution for controlling broadleaf weeds in ornamental turf, like lawns and landscaped areas․ It targets these weeds while leaving desirable grasses unharmed, ensuring a healthy and aesthetically pleasing turf․

The application rate for ornamental turf varies depending on the severity of the weed infestation and the type of turfgrass․ A general guideline is to use 2 to 4․2 pints of Hi-Yield 2, 4-D Selective Weed Killer per acre per site․ However, always refer to the product label for the most accurate mixing instructions and application rates․

For small areas, you can mix the Hi-Yield 2, 4-D Selective Weed Killer in a smaller volume of water․ A common practice is to use 3 to 4 fluid ounces (6 to 8 Tablespoons) per 1,000 square feet․

Ensure that the application is uniform throughout the area․ It is important to avoid applying the herbicide during periods of high heat or when rain is expected․

For optimal control of broadleaf weeds, it is recommended to apply Hi-Yield 2, 4-D Selective Weed Killer when the weeds are actively growing․ Remember to always wear protective gear, such as gloves and eye protection, when handling and applying herbicides․

Pastures and Range Land

Hi-Yield 2, 4-D Selective Weed Killer is a valuable tool for managing broadleaf weeds in pastures and range land, promoting healthy forage growth for livestock․ Its selective action targets broadleaf weeds, leaving desired grasses undisturbed, contributing to a balanced and productive grazing environment․

The application rate for pastures and range land depends on the specific weed species and the desired level of control․ A common practice is to apply 3 to 4 ounces of Hi-Yield 2, 4-D Selective Weed Killer per 1,000 square feet․ This translates to mixing 3 to 4 ounces of the concentrate in 1 to 3 gallons of water․

However, it is crucial to consult the product label for precise application rates, as these may vary based on the specific weed species present․

The application should be conducted uniformly across the targeted area, ensuring that the herbicide reaches all the weeds․ It’s essential to avoid applying the product during periods of high heat or when rainfall is anticipated․

For optimal weed control, it is recommended to apply Hi-Yield 2, 4-D Selective Weed Killer when the weeds are actively growing․ Always wear protective gear, such as gloves and eye protection, when handling and applying herbicides․

Aquatic Surface Application

Hi-Yield 2, 4-D Selective Weed Killer can be utilized for controlling certain aquatic weeds that can disrupt the balance of water bodies․ It’s important to note that this application should only be undertaken with careful consideration and adherence to local regulations, as the use of herbicides in aquatic environments can have potential ecological impacts․

For aquatic surface application, the recommended mixing ratio is 4 pints of Hi-Yield 2, 4-D Selective Weed Killer per 100 gallons of water․ This solution should be thoroughly mixed to ensure even distribution of the herbicide․

The application should be made carefully to target the specific aquatic weeds, minimizing contact with non-target plants and wildlife․ It’s crucial to avoid applying the herbicide during periods of strong winds or currents, which could lead to drift and unintended impacts on surrounding areas․

It’s advisable to consult with a qualified professional or local environmental agency for guidance on best practices for aquatic weed control, including the appropriate application methods and potential risks․

The responsible use of herbicides in aquatic environments is essential to balance weed management needs with the protection of aquatic ecosystems․ Always prioritize safety and environmental considerations when applying herbicides in or around water bodies․

Safety Precautions

Using any herbicide, including Hi-Yield 2, 4-D Selective Weed Killer, requires a commitment to safety to protect yourself, others, and the environment․ Always prioritize safety and follow these precautions before, during, and after application⁚

Read the Label⁚ Carefully read and understand the entire product label before mixing or applying Hi-Yield 2, 4-D Selective Weed Killer․ The label contains crucial information about safety precautions, application rates, and potential hazards․

Personal Protective Equipment (PPE)⁚ Wear appropriate PPE, including long-sleeved shirts, long pants, closed-toe shoes, gloves, and eye protection․ A respirator may be necessary depending on the application method and environmental conditions․

Wind and Drift⁚ Apply Hi-Yield 2, 4-D Selective Weed Killer on calm days with minimal wind to prevent drift onto non-target plants or areas․ Avoid applying during periods of strong wind or when rain is imminent․

Water Contamination⁚ Avoid applying Hi-Yield 2, 4-D Selective Weed Killer near bodies of water or drainage areas to minimize the risk of contamination․ Do not apply directly to water or allow runoff into streams, ponds, or lakes․

Storage⁚ Store Hi-Yield 2, 4-D Selective Weed Killer in a cool, dry place, away from children and pets․ Keep the container tightly sealed to prevent spills and accidental ingestion․

Disposal⁚ Dispose of empty containers properly according to local regulations․ Do not reuse containers for other purposes․

First Aid⁚ In case of accidental contact with skin or eyes, immediately flush the affected area with plenty of water for at least 15 minutes․ If ingested, seek immediate medical attention and bring the product container with you for identification purposes․